GR1.1 CM5000 Software Release Note
m
Motorola Release Note
TETRA Terminals
GR1.1 software and hardware for
CM5000
CM5000 SW: MR01.0xx.09
Native Programmer (CPS): version 1.0.9
Document revision: Issue 1
Compass Location:
http://compass.mot.com/go/256657003
Revision Date: 6
th
Nov 2008
Motorola – TETRA Terminal and Accessory Product Operations Group
GR1.1 CM5000 Software Release Note
m
CHANGE HISTORY
Issue Date
Author
Description
O 2
nd
July 2008
Chas Couchman
Approved for release
1 6
th
Nov 2008
Chas Couchman
OTAR SCK and DMO SCK
features removed from release.
GR1.1 CM5000 Software Release Note
m
Table of Contents
)........................................................................................... 5
GR1.1 CM5000 Software Release Note
m
Introduction
The overall purpose of this document is to introduce the reader to the GR1.1 software release
prior to operating the CM5000 TETRA terminal.
1.1 Purpose
This document defines the first release of the GR1.1 software release.
For a more detailed description of the CM5000 TETRA terminals, please refer to:
1. the previous Customer Release Notes referred section 8.1.
2. or on Motorola Online
https://businessonline.motorola.com
(accessible for Motorola Partners).
3. and through your usual Motorola channel partner account manager.
1.2 Acronyms and Abbreviations
APAC
Asia Pacific Region
CR
Change
Request
CPS
Customer Programming Software
DCK
Digital Car Kit
DGNA
Dynamic Group Number Assignment
DMO
Direct Mode Operation
EMEA
Europe, Middle East and Africa
IOP
Intra-Operability
KVL
Key Variable Loader
MMI
Man Machine Interface
MR
Mobile
Release
MS
Mobile
Station
PD
Packet
Data
PPC
Pre-emptive Priority Call
PIN
Personal Identity Number
PTT
Push To Talk
RSM
Remote Speaker Microphone
RL
Remote
Listening
SDS
Short Data Service
SI
System
Integration
SW
Software
SwMI
Switching and Management Infrastructure
TG
Talkgroup
TMO
Trunked Mode Operation
TXI
Transmit
Inhibit
GR1.1 CM5000 Software Release Note
m
2 Product and Release Information
2.1 Product Details
The GR1.1 software release can be installed in the following TETRA terminals:
• CM5000
The CM5000 Mobile terminal is available to work within the following frequencies:
• 380 – 430 MHz
The CM5000 terminal will be delivered with the following encryption possibilities:
• TETRA
Clear
• TETRA Encryption Algorithm 1 (TEA1) without End to End Encryption
• TETRA Encryption Algorithm 2 (TEA2) without End to End Encryption
• TETRA Encryption Algorithm 3 (TEA2) without End to End Encryption
The TEA1-3 SW also includes the option for DMO SCK types 2a, 2b and 2c.
2.2 New Features
The software and hardware developed in this release is new by definition, new features are listed in
section 5.
2.3 Enhancements
The following list includes all the customer cases closed with GR1.1 software release.
Case reference
Headline
• None
required
The following list includes all the customer cases closed with the
new v1.0.9 CPS:
Headline
“Gateway Detected” was displayed whilst CM5000 is operating in Gateway Monitor
Mode and CM5000 detects DPRES-SYNC from the Repeater. Display corrected to
read “Repeater Detected”
2.4 Release Version Information (Release Name)
Encryption
CM5000 Radio
CM5000 Panel
CLEAR
MR01.000.009 MP01.000.005
TEA1
MR01.011.009 MP01.000.005
TEA2
MR01.012.009 MP01.000.005
TEA3
MR01.013.009 MP01.000.005
GR1.1 CM5000 Software Release Note
m
Note: The software includes DMO SCK encryption to versions numbers shown above have been raised
to MR01.0xx.007, however E2E encryption is not supported in standard Mobile Radio operation.
2.5 CPS support
Native Programmer:
v1.0.9 (for configuring Radios)
2.6 SW Loading
In addition to the CPS detailed above, two SW loading tools are required, separately
supporting the Radio and Panel SW.
Application Writer:
v201 (for loading Radio SW)
Panel Writer
v200 (for loading Panel SW)
2.7 Supported Languages
The CM5000 terminal is capable of supporting the following languages:
• English
• Lithuanian
• French
• German
• Spanish
• Dutch
• Norwegian
• Swedish
2.8 Notes on how to upgrade and languages
See section 7 on how to deal with new languages when upgrading radios.
GR1.1 CM5000 Software Release Note
m
2.9 System Baseline Version
The CM5000 TETRA terminal with GR1.1 software was tested using the following
infrastructure:
Dimetra
SR-5.2
Component
Version
Remarks
SwMI
SW
D-5.2 Q2 05 SER
SC
SW
TSC PR3 APP R05.32.60
BRC
SW
R051258, R051358
AIE
Component
Version
Remarks
PrC
Server
R01.01.00
Provisioning Centre
Client
R01.01.00
Database
R01.00.00
AuC
Server
R05.05.01
Authentication Centre
Client
R05.05.01
Database
R05.05.01
CC
CCC
200
Crypto Card
CE
0201
KVL
SW
R04.01.24
E2E
Component
Version
Remarks
KMF
Server
R04.00.20
Client
R04.00.20
CC
SW
0201
Crypto Card
Algorithm
AES128-0F8
KVL
SW
R04.50.15
Card
D02.03.11
KVL
(RTC)
SW
D04.50.18
E2E RTC
Card
U02.07.01
2.10 Limitations to use
The software release specified in this release notes are full MS Release and are certified for
operational use.
GR1.1 CM5000 Software Release Note
m
2.11 Operation Notes
This section outlines all exceptions and defects known at the time of issue that are
considered to have a customer impact. A customer impacting exception is defined below:
• A defect or fault for which there is a valid and viable workaround but the lack of
awareness of the workaround could have safety implications or render the product
unusable.
• A temporary change in procedures is required to ‘workaround’ a defect or fault in order
to maintain a feature or function.
• Cosmetic problems which may mislead users and cause unnecessary alarm or which
are particularly distracting or annoying.
This section does not include:
• Anomalies observed during the System Integration phase of the release, which are
not reproducible.
• Defects that cause performance degradation, which cannot be detected by the user.
• Cosmetic defects that are not listed above.
• Defects that will only manifest as faults after two or more consecutive low probability
system faults have occurred.
Unless stated otherwise within the text of the exception/defect, a solution to each problem is
being sought by the development group.
Notes:
• To enable following function in Native Programmer [DMO] – Functions sheet “Setup
with Presence Check”, please ensure that the function is set to “ON”
The following section outlines brief Operation Notes for respectively TETRA terminal and
CPS.
2.11.1
TETRA Terminals
The GR1.1 software operation notes for TETRA terminals are the following:
• SCI Watch Tool V1.0.5 is required for correct analysis of signalling between the
CM5000 and System for this GR1.1 SW release
• This release now allows just a single GPS function to be enabled at any one
time (i.e. LIP), rather than multiple functions.
• “Repeaters Detected” is now displayed when CM5000 detects DPRES-SYNC
from a repeater.
The known defects delivered with this software are the following:
• No known defects
GR1.1 CM5000 Software Release Note
m
2.11.2
CPS
The operation notes for using GR1.1 CPS with the CM5000 terminal are the following:
• To enable “Individual Call through the Gateway” then the “Setup with Presence
Check” needs to be set “ON” via the Native Programmer.
• Native Programmer now also supports:
TNP1 call control settings
Permanent disable with authentication
Temporary
enable/disable with authentication
2.11.3
SciWatch
The operation notes for using V1.0.5 SciWatch with the CM5000 terminal are the following:
• Supports interface for Type 1A Repeater
• Supports Kill functionality.
2.11.4
KVL
Notes for KVL operation with CM5000:
• Set Motorola KVL for Baud rate 9600
• To place CM5000 into KVL mode - Switch OFF radio, Press “Menu + 6 + power up”
keys together (radio displays Green LED + blank screen) then attach KVL via 20
pin cable GMKN1022A.
• Program keys as per KVL manual……….
2.11.5
Activate software features
From this SW release all pin activated sales features are disabled:
• QA00452AA - Gateway
• QA00453AA - Repeater
• QA00450AA - GPS
• QA00451AA - Multi Slot packet data
To activate these features the feature option needs to have been first selected and
purchased, a radio specific set of pin codes covering the purchased features is supplied with
each radio that allows the customer to enable each radio with its applicable functionality.
To enable features
• Turn off radio
• press and hold green “call key” and “up” navigation key
• Turn on radio
• Select feature from list and enter feature pin code.
• Select next feature………..
• Turn off radio
GR1.1 CM5000 Software Release Note
m
2.11.6
TIB (Technical Information Bulletin)
The following TIBs apply to this software release:
None
applicable
TIBs are stored at:
- Compass (only accessible for Motorola employees)
•
http://compass.mot.com/go/139353500
they can be obtained through your usual Motorola channel partner account manager.
2.12 User manuals
Elsewhere in the document an overview of the characteristics of the GR1.1 features is provided. For
detailed operation descriptions of the introduced features, please refer to the CM5000 latest user
manuals from MOL (Motorola Online)
• CM5000 Basic User Guide
• CM5000 Feature User Guide
• CM5000 Programming Manual
• CM5000 Basic Service Manual
• CM5000 Installation Manual
• CM5000 Programming Manual
Once logged on, go to Resource centre, then TETRA terminals,
then Mobile Radios, then chose
CM5000. If you don’t access MOL get in contact with your usual Motorola channel partner account
manager.
2.13 Features removed in this Release
The SCK features detailed in earlier versions of this release note have been removed due to these features
not accepting encrypted SCK’s.
• OTAR of SCK
• DMO Encryption SCK
3 CPS GR1.1 Items
The CPS for GR1.1 is a new release as detailed in the supporting documentation.
4 ACCESSORIES
The following additional Cleartone accessories are certified with the CM5000 terminals within release
GR1.1:
GR1.1 CM5000 Software Release Note
m
GMLN4740A
Universal Din Mnt CM5000
GMLN4741A
Remote Mount Kit CM5000
GMLN4742A
Dual Mode interface
GR1.1 CM5000 Software Release Note
m
5 GR1.1 New Features Description
The below section lists the new features introduced with GR1.1, the functionality of the majority of the
features detailed below are based upon the MTM800, MTM800E, MTP850 and MTH800 products.
Details regarding the operation and functionality can be found in the documentation detailed in section
2.12.
• Norwegian
Language
• Lithuanian Language (enhancements)
• Setting of initial Baud rate for PEI by Native Programmer
• Gateway / Repeater / MSPD / GPS pin code enablement
• Kill
functionality
• Type 1A repeater functionality
• TNP1 for call control
• Multiple radio programming capability
• TMO-DMO DMO-TMO Individual Call, Individual Call through the GW
• TMO-DMO DMO-TMO SDS Call, Individual SDS through the GW
The following features were also included in the GR1.0 release in addition to those detailed in
previous release note.
• Automatic Microphone Gain adjustment during ‘Hot’ microphone emergency
• Screen
Saver
• DCK retrieval and forwarding on Nokia/EADS infrastructure
• CPS software code plug password enable
6 Annex – Software enablement kit
With GR1.1 the four software selling features are enabled and will require individual radio specific pin
enablement, these being.
• Gateway
• Repeater
• GPS
• Multi Slot packet Data
GR1.1 CM5000 Software Release Note
m
7 Annex – CPS Upgrade and Languages
There are no specific upgrade requirements for the GR1.1 release.
7.1 Upgrade and Load Language packs
There is no specific upgrade or loading requirements for the GR1.1 release.
7.2 Upgrade Only
There are no specific upgrade requirements for the GR1.1 release.
8 Annex - Previous GRx.x Releases
There is one previous release, GR1.0.
8.1 Documentation
For a more detailed description of the CM5000 TETRA terminal, please refer to the previous
Customer Release Notes available on:
http://compass.mot.com/go/tetracps
- Compass (only accessible for Motorola employees), or through your usual Motorola channel
partner account manager.
There is one previous release, GR1.0.
GR1.1 CM5000 Software Release Note
m
9 Annex – GR1.1 CPS System Requirements
The CM5000 TETRA CPS requires an IBM® PC or compatible computer with the following
minimum configuration:
Processor:
• Minimal configuration, and to program one terminal at a
time: Pentium 1 GHz. OR,
• For multiple terminal programming at the same time:
Pentium 2GHz or above.
Memory (RAM):
• Minimal configuration, and to program one terminal at a
time: 256 MB. OR,
• For multiple terminal programming at the same time: 512
MB or above.
RS-232 Serial port:
At least one free.
USB (Universal Serial Bus) port
If no RS-232 port is available – to allow upgrade and flashing of
software, USB to RS-232 adaptor required.
Free hard disk space for
installation:
70 MB
Drive: CD-ROM
Operating system:
Microsoft Windows 2000 Professional and Windows XP
Professional
Language: English
Please note that RS232 connection of the radio to the PC must be direct and not through a
docking station.
Please also note that for multiple programming the following RS232 multi-way adaptors are
required:
• Interface board
Description: 8ch RS232C Communication Board for PCI
Type: COM-8(PCI)H
Supplier: CONTEC CO., LTD
• Divider cable
Description: Divider Cable for RS-232C 8ch (78P -> 9P x8)
Type: PCE78/9PS
Supplier: CONTEC CO., LTD