Iced Seas by FusionBeads.com

Approximate finished length: 2.75 inches

Beads and other products needed for one pair of earrings:

36 (1 strand) – 3mm African Opal Round Beads (SE0501)
14 (1 strand) – 3mm Green Aventurine Round Beads (SE0527)
26 (1 strand) – 4mm Amazonite Round Beads (SE0576)
24 (1 strand) – 4mm Green Aventurine Round Beads (SE0598)
2 – 48x22mm Antique Brass Base Metal Chandelier (BM0176)
1 pair – 16mm Natural Brass Fine Ear Wires (NB0250)
2 – 4.75mm Natural Brass Jump Rings (NB0203)
100 – 1.5” 24 Gauge Natural Brass Head Pins (NB0248)

Tools needed to complete the earrings:

Wire cutters
Chain nose pliers
Round nose pliers

Beading Techniques needed to complete the earrings:

Attaching an Ear Wire
Wire Wrapping

For step-by-step photos and instructions on these and other techniques, visit FusionBeads.com and select
Beading Techniques from the top navigation bar.

Instructions to complete “Iced Seas” earrings:

Tip
These earrings are made by wire wrapping semi-precious units to the mesh portion of metal chandeliers.  Be
careful when wire wrapping, as the mesh is fragile and moves easily.  The units are wire wrapped at random
without a pattern.  You may choose to make them more or less full.

Step 1
Place one 3mm African opal round bead onto a natural brass head pin, making one unit. Wire wrap (see Wire
Wrapping Technique) this unit to any portion on one antique brass base metal chandelier.

Step 2
In the same fashion, continue wire wrapping 17 3mm African opal rounds, 7 3mm green aventurine rounds, 13
4mm amazonite rounds, and 12 4mm green aventurine rounds to the various pieces of mesh on the chandelier,
until you reach your desired effect.

Step 3
Repeat Steps 1 and 2 for the second earring.

For more Inspiration jewelry ideas and to meet all your beading needs, visit FusionBeads.com!