Gemini XPM600 900 1200 pwr Service Manual

Page 1

SERVICE MANUAL

XPM-600
XPM-900

XPM-1200

Power Amplifers

CONTENT’S:

Connections & Operations:.......................................................Page 2-5

Specifications:..............................................................................Page 6

Parts Lists:...............................................................................Page 8-20

PCBs:......................................................................................Page 21-22

Schematics:.................................................................................Page 23

Gemini Sound Products Corp.

120 Clover Place P.O. Box 6928

Edison, NJ 08818-6928

732-738-9003 (Phone) • 732-738-9006 (Fax)

Stereo

Mono Bridge

Parallel Mono

Page 4

Clip LED (15): the amplifier has true clip LEDs to help you properly

control the amplifier’s output and achieve undistorted sound. The clip
LEDs for each channel light when your signal level is so strong that
the distortion reaches 1% THD. The clip LED should not remain
constantly on or flash repeatedly during operation. For clean sound
reproduction, the clip should only light occasionally for an instant. If
the LED remains on or flashes repeatedly, you will hear distorted
sound that can be damaging to your speaker systems. If this occurs,
reduce the signal level by lowering the input level control for the
channel that is clipping or reduce the level at the source. If the clip
LED lights when no signal is present, it may indicate a RF signal on
the output which may cause damage to speakers (the RF signal will
not be audible). Please note that when you are using the amplifier in
the Mono Bridge mode, both clip LEDs of the bridged channels will
operate simultaneously.

Protect LED (16): when you first turn on the amplifier, the protect LEDs

light briefly during a turn-on delay which indicates that the outputs are
disconnected internally. There will be an audible click when the
outputs reconnect and the protect LEDs will turn off. Otherwise, the
protect LED indicates that there is a problem either in the amplifier’s
external connections, load or temperature conditions or its internal
functions. If one of these situations occur, the amplifier senses the
problem and automatically switches into protection mode. The LED
will light to warn you of the trouble and the amplifier will stop working.
If this occurs, switch off the amplifier and refer to the Trouble
Shooting Guide. If the protect LED remains lit when resuming
amplifier operation, do not use the amplifier and contact an
authorized service technician.

Level Controls (17, 18): establish the input levels required for each

channel. Only the Channel A Level Control (17) works in Mono
Bridge mode.

Operating Instructions

THE AMPLIFIER’S POWER MUST BE TURNED OFF WHEN

CHANGING MODES OF OPERATION.

Stereo Operation

The unit has two channels for stereo operation. Each channel

provides a separate and discrete signal at the speaker outputs according
to the signal received at the inputs. The following instructions are for
applications with 4 Ohm or 8 Ohm speakers of matched power ratings.

1. With the power off, set the OPERATION MODE SWITCH (3) to the

STEREO position. When the power is on, the Mono and Bridge LEDs
on the front panel will not light. If these LEDs illuminate, you have the
switch in the wrong position. Correct before continuing.

2. With the power off, connect your input cables to the channel A and B

inputs using either the XLR INPUT JACKS (1, 5) or 1/4" INPUT
JACKS (2, 4) of each channel. The other channel A and channel B
inputs can be used to link to an additional amplifier.

3. Connect the loudspeakers to the channel A and channel B SPEAKER

OUTPUTS (9, 11). THE TOTAL SPEAKER LOAD MUST BE AT
LEAST 4 OHMS PER CHANNEL. If you try to operate at a lower
impedance, the amplifier will go into protection mode and stop
operation until you correct the load conditions.

4. With the LEVEL CONTROLS (17, 18) of both channels set to zero

(fully counterclockwise), turn the POWER SWITCH (20) on. Apply a
signal to the input of the amplifier. The level of the input signal should
be as high as you will ever need it to be. This way, it will be as high
above the amplifier’s noise floor as possible, ensuring an excellent
performance and signal to noise ratio. Adjust the LEVEL CONTROLS
for each channel to achieve the desired maximum listening level.
Note, when the clip LEDs light, there is distortion present in the
amplifier’s output section. If a clip LED remains on or flashes
repeatedly, reduce the signal level by lowering the input level control
for the channel that is clipping or reduce the level at the source.

Connections, Controls and Indicators

Rear Panel

Note: 120V and 230V units have different types of output

connectors on the rear panel.

Input Section:

There are two parallel input connectors (one female XLR and one

1/4” jack) per channel. Either can be used as an input or as a link to
chain amplifiers.

XLR Input Jacks (1, 5): electronically balanced inputs accept a standard

XLR male connector. Pin 1 = shield/ground, pin 2 = hot or positive (+)
and pin 3 = cold or negative (-).

1/4" Phone Input Jacks (2, 4): accept a balanced as well as an

unbalanced line level signal. The unbalanced line uses a standard tip-
sleeve connection. The tip is positive and the sleeve is negative/
ground. The balanced line uses a tip-ring-sleeve connection. Tip =
hot or positive (+), ring = cold or negative (-), and sleeve = shield/
ground.

Operation Mode Switch (3): switch is used to set the unit for Stereo

mode, Parallel Mono mode or Mono Bridge mode.

AC Power Section:

Fuse (7): replace fuse with those of proper type and rating.

Ground Lift Switch (8) is used to lift the ground from the chassis. See

the Ground Lift Switch Instructions for more detail.

AC Cord Outlet (6) is used to attach the power cord to the unit.

Output Section:

Disconnect unit from the AC power source before making any

connections. Pay close attention to polarity (shown on the back of the
unit) when connecting your speakers. Connecting your speaker systems
using the wrong polarity will not damage your speakers, but it will impact
the quality of the sound (lack of bass and incorrect stereo image).

Speaker Outputs for 120V Unit (9, 10, 11): the speaker output jacks

are 5-way binding posts that will accept a standard banana plugs,
spade lugs or bare wire. Make sure that all the connections are clean
when using bare wire connections. If any strands of wire from one
connector touch the adjacent connector, the sound will be distorted,
and your amplifier will overheat and go into protection mode.

Speaker Outputs for 230V Unit (9, 10, 11): Neutrik Speakon

connectors are provided to connect speakers to the amplifier quickly
and easily. They are high current rated and provide very stable and
durable contacts. A third Speakon connector in the center is provided
to be used if the amplifier is in the Mono Bridge mode. Every
Speakon connector has pin 1- as negative and pin 1+ as positive.

NOTE: Total speaker impedance must not be lower than 4

Ohm per channel for Stereo and Parallel Mono modes, or 8

Ohm for Mono Bridge mode.

Front Panel

Power Switch (20): turns the unit on and off.

Power LED (19): the power LED lights when the power is on. If the

power LED does not light, refer to the trouble shooting guide.

Mono LED (12): the mono LED will light when you have set the rear

panel Operation Mode Switch (3) for parallel mono operation.
Always make sure that this switch is in the correct position and that
all speaker connections have been made correctly for the mode of
operation you wish to use before powering up the amplifier.

Bridge LED (13): the bridge LED will light when you have set the rear

panel Operation Mode Switch (3) for mono bridge operation. Always
make sure that this switch is in the correct position and that all
speaker connections have been made correctly for the mode of
operation you wish to use before powering up the amplifier.

Signal LED (14): the signal LEDs for each channel show when a signal

is present. In Mono Bridge mode, both the channel A LED and the
channel B LED will light in unison.

Page 5

Parallel Mono Operation

Follow these instructions for Parallel Mono Operation using a single

input cable, and you will have the same monophonic signal on both the
channel A and the channel B outputs. Each channel’s output is
controlled independently by that channel’s level control.

1. With the power off, set the OPERATION MODE SWITCH (3) to the

PARALLEL MONO position. When the power is on, the MONO LED
(12) on the front panel will light. If the LED does not illuminate, you
have the switch in the wrong position. Correct before continuing.

2. With the power off, connect your input cables to the channel A input

only using the either the XLR INPUT JACK (5) or 1/4" INPUT JACK
(4) of channel A. The other channel A input can be used to link to an
additional amplifier.

3. Connect the loudspeakers to the channel A and channel B SPEAKER

OUTPUTS (9, 11). THE TOTAL SPEAKER LOAD MUST BE AT
LEAST 4 OHMS PER CHANNEL. If you try to operate at less than 4
Ohms per channel, the amplifier will go into the protection mode and
stop operation until you correct the load conditions.

4. With the LEVEL CONTROLS (17, 18) set to zero (fully

counterclockwise), switch the power on. Apply a signal to the input.
The level of the input signal should be as high as you will ever need it
to be. This way, it will be as high above the amplifier’s noise floor as
possible, ensuring an excellent performance and signal to noise ratio.
Adjust the LEVEL CONTROLS for each channel to achieve the
desired maximum listening level. Note, when the clip LEDs light,
there is distortion present in the amplifier’s output section. If a clip
LED remains on or flashes repeatedly, reduce the signal level by
lowering the input level control for the channel that is clipping or
reduce the level at the source.

Mono Bridge Operation

Follow these instructions to bridge the unit’s outputs. Bridging the

amplifier converts the unit to a monophonic or single channel. The
amplifier can be used with 8 Ohm or higher loads only in Mono Bridge
mode. This mode is used to provide a higher voltage with greater
headroom to your speaker. Before setting your amplifier for Mono Bridge
operation, make sure that your speaker can handle the high power level
provided by the amplifier in Mono Bridge mode. CAUTION: VOLTAGE
OVER 100 VOLTS MAY BE PRODUCED AT THE BRIDGE OUTPUT
TERMINALS IN THIS MODE.

1. With the power off, set the OPERATION MODE SWITCH (3) to the

BRIDGE position. When the power is on, the BRIDGE LED (13) on
the front panel will light. If the LED does not illuminate, you have the
switch in the wrong position. Correct before continuing.

2. With the power off, connect your input cables to channel A input only

using the either the XLR INPUT JACK (5) or 1/4" INPUT JACK (4) of
channel A. The other channel A input can be used to link to an
additional amplifier.

3. Connect the loudspeaker to the BRIDGE SPEAKER OUTPUT (10)

only. With a 230V unit, use the center speakon. With a 120V unit, use
the two innermost red terminals. Be sure the polarity of your
connections is correct. The total speaker load must be at least 8
Ohms or above. If you try to operate at less than 8 Ohms in the Mono
Bridge mode, the amplifier will go into the protection mode and stop
operation until you correct the load conditions.

4. With the CHANNEL A LEVEL CONTROL (17) set to zero (fully

counterclockwise), switch the power on. Apply a signal to the input.
The level of the input signal should be as high as you will ever need it
to be. This way, it will be as high above the amplifier’s noise floor as
possible, ensuring an excellent performance and signal to noise ratio.
Adjust the LEVEL CONTROL (17) for channel A to achieve the
desired maximum listening level. Note, when the clip LEDs light,
there is distortion present in the amplifier’s output section. If a clip
LED remains on or flashes repeatedly, reduce the signal level by
lowering the input level control for channel A or reduce the level at
the source. During Mono Bridge operation, the channel B level is
inactive, however, both channels LEDs will flash simultaneously and
show output conditions.

Using the Ground Lift Switch

Depending on your system configuration, sometimes applying the

ground will create a quieter signal path. Sometimes lifting the ground can
eliminate ground loops and hum to create a quieter signal path.

1. With the power amp on, listen to the system in idle mode (no signal

present) with the ground applied (the GROUND LIFT SWITCH (8) in
the left position).

2. Then turn the power off before moving the GROUND LIFT

SWITCH (8). Lift the ground by moving the GROUND LIFT SWITCH
to the right, turn the power back on and listen to determine which
position will provide a signal devoid of background noise and hum.
Keep the GROUND LIFT SWITCH in the ground position if the noise
level remains the same in either position.

CAUTION: DO NOT TERMINATE THE AC GROUND ON THE POWER
AMPLIFIER IN ANY WAY. TERMINATION OF THE AC GROUND CAN
BE HAZARDOUS.

Page 6

UNIT DOES NOT PRODUCE SOUND. POWER
LED DOES NOT LIGHT.

• POWER SWITCH NOT IN ON POSITION.

• POWER CABLE NOT CONNECTED TO AMPLIFIER
OR TO OUTLET.

• AC OUTLET NOT ACTIVE.

• MAIN AMPLIFIER FUSE DEFECTIVE.

• MOVE POWER SWITCH TO ON POSITION.

• CONNECT POWER CABLE TO AC SUPPLY.

• CHECK CONDITION OF OUTLET.

• REPLACE AMPLIFIER MAIN POWER FUSE ON REAR
PANEL WITH CORRECT TYPE AND RATING.

POWER LED LIGHTS, BUT NO SOUND IS
PRODUCED BY AMPLIFIER.

• NO INPUT SOURCE SIGNAL.

• INPUT SOURCE NOT CONNECTED.

• INPUT CONNECTING CABLE DEFECTIVE.

• SPEAKER(S) NOT CONNECTED.

• SPEAKER CABLE DEFECTIVE.

• SPEAKER SYSTEM(S) INOPERATIVE.

• AMPLIFIER’S LEVEL CONTROLS ARE SET TO
ZERO.

• CHECK FOR PROPER FUNCTION OF INPUT
SOURCE DEVICE.

• CHECK INPUT CABLES AND CONNECTIONS.
REPLACE QUESTIONABLE CABLES WITH KNOWN
GOOD CABLES.

• CHECK SPEAKER CABLES AND CONNECTIONS.
REPLACE QUESTIONABLE CABLES WITH KNOWN
GOOD CABLES.

• CHECK OPERATING CONDITION AND STATUS OF
SPEAKER SYSTEM(S). BE SURE THE LEVEL
CONTROLS ARE PROPERLY SET.

SOUND IS PRESENT BUT VOLUME IS TOO
LOW EVEN THOUGH SOURCE DEVICE IS
SET TO A HIGH LEVEL.

• AMPLIFIER INPUT LEVEL CONTROLS ARE SET
TOO LOW.

• WRONG PIN CONNECTIONS IN CABLES.

• ADJUST LEVEL CONTROLS AS PER INSTRUCTIONS.

• USE CORRECT CABLES (AS SHOWN ON BACK OF
UNIT).

LOUD 50/60 HZ OR 100/120 HZ HUM IS
HEARD AT ALL TIMES THROUGH THE
SPEAKER SYSTEMS.

• IMPROPER OR DEFECTIVE GROUND
CONNECTION AT INPUTS. IMPROPER OR
DEFECTIVE GROUND AT INPUT SOURCE
DEVICE(S).

• IMPROPER OR DEFECTIVE GROUND
CONNECTION ON AC OUTLET.

•

GROUND LOOP THROUGH AC LINE

CONNECTION/RACK MOUNTING.

• CHECK FOR PROPER AC LINE GROUND ON POWER
AMP AND ALL INPUT DEVICES.

• CHECK INPUT CABLES FOR ALL SOURCE DEVICES
AND SIGNAL PROCESSING AS WELL AS INPUT
CABLES TO POWER AMPLIFIER. CHECK POSITION
OF GROUND LIFT SWITCH AS PER INSTRUCTIONS
FOR LIFTING THE GROUND.

• NEVER LIFT THE AC LINE GROUND ON THE POWER
AMPLIFIER. IF YOU ARE NOT TOTALLY FAMILIAR WITH
GROUND LIFTING OR UNIFICATION PROCEDURES,
DO NOT ATTEMPT THEM WITHOUT FIRST CONSULTING
YOUR DEALER OR A QUALIFIED SOUND
TECHNICIAN FOR MORE INFORMATION ON
GROUNDING. IMPROPERLY DONE, SUCH
PROCEDURES CAN POSE A SAFETY AND/OR FIRE
HAZARD.

SOUND IS DISTORTED.

• DISTORTION OCCURRING IN SOURCE DEVICE.

• INPUT LEVEL IS SET TOO HIGH.

• CHECK CLIP INDICATORS ON INPUT SOURCE
DEVICES AND RESET LEVELS IF NECESSARY TO
ELIMINATE DISTORTION.

• ADJUST LEVEL CONTROLS AS PER INSTRUCTIONS.

PROTECT LED REMAINS LIT OR GOES ON
AND OFF INTERMITTENTLY AFTER USING
AMPLIFIER FOR A SHORT TIME.

• UNIT IS OPERATING AT EXCESSIVELY HIGH
TEMPERATURE.

• EXTREMELY LOW SPEAKER IMPEDANCE.

• SHORT IN SPEAKER CONNECTORS, SPEAKER
CABLE OR SPEAKER SYSTEM.

• CHECK THAT AMPLIFIER IS ADEQUATELY
VENTILATED ON THE FRONT AND REAR PANELS
WHERE THE AIR VENTS AND FANS ARE LOCATED.
IF OVERHEATED, LET THE AMPLIFIER COOL DOWN
BEFORE APPLYING AN INPUT SIGNAL.

• CHECK THE POSITION OF OPERATION MODE
SWITCH. BE SURE THAT THE SPEAKER
CONNECTIONS ARE MADE IN ACCORDANCE WITH
THE SWITCH SETTING.

• VERIFY SPEAKER SYSTEM IMPEDANCES. BE SURE
THE TOTAL SPEAKER SYSTEM IMPEDANCE IS AT
LEAST 4 OHMS PER CHANNEL WHEN THE
OPERATION MODE SWITCH IS IN THE STEREO
POSITION OR PARALLEL MONO POSITION. IF THE
SWITCH IS IN THE BRIDGE MODE, THE IMPEDANCE
MUST BE AT LEAST 8 OHMS. IF YOU ARE NOT SURE
OF YOUR TOTAL SPEAKER IMPEDANCE LOAD,
CONTACT YOUR DEALER FOR MORE INFORMATION.

• CHECK CONDITION OF SPEAKER CABLES.

• IF USING BARE WIRE CONNECTIONS ON THE
OUTPUTS OF THE AMPLIFIER, BE SURE THAT NO
STRANDS FROM ONE CONNECTOR ARE TOUCHING
ANY OTHER CONNECTOR.

FUSE BLOWS INTERMITTENTLY.

• SPEAKER LOAD IMPEDANCE IS TOO LOW.

• TYPE OR RATING OF THE FUSE IS NOT
CORRECT.

• CHECK FOR SHORTS ON THE OUTPUTS.

• CHECK YOUR SPEAKER IMPEDANCE (INFO FROM
DEALER).

• CHECK THAT THE FUSE TYPE AND RATING IS
CORRECT.

PROTECT LED(S) STAY ON WITH NO
SPEAKERS CONNECTED AND WITH THE
AMPLIFIER COOLED DOWN.

• FAILED AMPLIFIER.

• CONTACT THE GEMINI SERVICE DEPARTMENT OR
YOUR AUTHORIZED DEALER TO SPEAK TO A
QUALIFIED SERVICE TECHNICIAN. IN THE U.S.A.
CALL TOLL FREE 1-800-476-8633

SYMPTOM

CAUSE

SOLUTION

Page 7

Specifications

Output Power EIA: 1kHz @ 1% THD

XPM-600

XPM-900

XPM-1200

Single Channel 8

Ω

230

310

400

Both Channels Driven 8

Ω

200

280

360

Single Channel 4

Ω

300

480

630

Both Channels Driven 4

Ω

270

400

530

Mono Bridge 8

Ω

550

800

1060

Dynamic Headroom:

XPM-600

XPM-900

XPM-1200

Ω

1.4

1.3

Ω

2.2

Frequency Response............................................................20 Hz - 60 kHz

Total Harmonic Distortion......less than 0.1%, typical 0.03% at 1 kHz

Intermodulation Distortion.......................less than 0.05% (SMPTE)

Signal to Noise Ratio..........................100 dB below rated power, 8

Ω

Damping Factor..............................greater than 200 @ 8

Ω

Slew Rate.................................................................................25 V/

Voltage Gain....................................................................33 dB

Input Sensitivity (for rated power at 8 Ohm):

XPM-600

XPM-900

XPM-1200

0.9 Vrms

1.1 Vrms

1.2 Vrms

Input Impedance Unbalanced....................................................10 kOhms

Input Impedance Balanced.......................................................20 kOhms

Power consumption:

XPM-600

XPM-900

XPM-1200

700 VA

900 VA

1100 VA

Note: power consumption is given at rated power at 8

Ω

per channel, both

channels driven.

AC Power Requirement:
(power connection is factory configured)............................120V/ 60 Hz

230V/ 50 Hz

Indicators.......................................................................1 Power Indicator

1 Signal LED per channel

1 Clip LED per channel

1 Protect LED per channel

1 Mono LED

1 Bridge LED

Cooling....................................2 Speed Dual Fan; Front-to-Rear Forced Air

Protection...........Short Circuit, DC, Thermal Cut-off, Sub/ultrasonic

Frequency Filters, In-rush Current Limiter, Turn-on Delay

Connectors:

Balanced/Unbalanced Inputs....................................1/4" Jack

Balanced Inputs............................................XLR Female Jack

Speaker Outputs (120V unit)..........................................5-way binding posts

Speaker Outputs (230V unit)...........Speakons (ch.A, ch.B and bridge)

Dimensions...................................19" x 13.75" x 3.5" (483 x 350 x 89 mm)

Weight

XPM-600

XPM-900

XPM-1200

25.8 lbs

29 lbs

31.2 lbs

11.7 kg

13.2 kg

14.2 kg

* Specifications and design are subject to change without notice for
purpose of improvement.

Page 8

102056543301

SPACER XPM-900

P C

102119214701

CARTON XPM-600

P C

102260018001

EXT.CARTON XPM-600

P C

103012005700

SPACER 1200x570m/m

P C

105011008501

HOLDER XPM-900

P C

105032409601

WALL XPM-900

P C

105034608501

SILD PANEL XPM-900

P C

105242608601

BACK BOARD XPM-600

P C

105343431801

TOP COVER XPM-900

P C

10)

105443431701

BOTTOM CABI XPM-900

P C

11)

107042002501

AIRFILTER 420x25m/m XPM-900

P C

12)

107042004001

PVC COVER XPM-600

P C

13) 1070ACS03501

ACS-3.5

PVC

RED

P C

14)

1070KG-010—

M0VEABLE BUSHING KG-010

15)

1070SCB-10—

SPACER SUPPORTS SCB-10 XPM-900

P C

16) 1070SS-6——

SELF RETATINING SPALERS SS-6

P C

17)

1070YJ-98—-

NYLON CLAMPER YJ-98

P C

1 2

18)

AL201AL50101

AL201/AL501 SJT W-A 14AWG 6FT

P C

19) AO016D130—-

3P AC INLET AC-016D130 XPM-900

P C

20) 105006400001

6.4m/m

P C

21)

106203003003

RECTIFER HEAT SINK XPB-1600

P C

22)

106201302001

HEAT SINK BLACK 13x20 XPM-900

P C

23)

1070LED-3.5-

LED SPACER SUPPORT LED-3.5

P C

24)

700KBP060002

RECTIFIER KBP06 2A 600V

P C

25) 700MP3504W02

RECTIFIER MP3504W 35A 400V

P C

26)

CCN0A101250K

CERAMIC CAP 100P 250V

P C

27)

CCN0A680500J

CERAMIC CAP 68P 500V NPO 5%

P C

28) COIL16115T6L

COIL 1.6x10.1x11.5T-6L XPM-900

P C

29)

ECL04700080M

ELEC CAP 4700u80v

P C

30)

ECS00010050M

ELEC CAP 10u50v

P C

31)

ECS00100025M

ELEC CAP 100u25v

P C

32)

ECS00100100M

ELEC CAP 100u100v

P C

33)

ECS00220016M

ELEC CAP 220u16v

P C

34)

ECS01000025M

ELEC CAP 1000u25v

P C

35)

ECS02200025M

ELEC CAP 2200u25v

P C

36) ICNJM3404AD-

NJM3404AD

P C

37) ICTL072CP—-

TL072CP

P C

38)

JS1001025003

BASE 3P 2.5m/m

P C

39)

JS1001025012

BASE 12P 2.5m/m

P C

40)

JS1001R25002

BASE 2P JS-1001R-02

P C

XPM-600

Page 9

41)

LDG050210030

LED 5m/m GREEN

P C

42)

LDR050410030

LDE 5m/m RED

P C

43)

LDY050610030

LDE 5m/m YELLOW

P C

44)

MJ0860250900

CONNOC JACK 086-25-90

P C

45)

MJCPJ-065—-

JACK CPJ-065 XPM-900

P C

46)

MPMEA104250K

MEA .1u 250V 10%

P C

47)

MPMEF104250K

MEF .1u 250V 10%

P C

48) NTM3x07x030Y

NUT 3m/m W/S (0J0010-030001)

P C

49)

RC0200A47005

RESISTORS 4.7 ohm 2W M

P C

50)

RC0201000005

RESISTORS 10 ohm 2W M

P C

51)

RC0202230005

RESISTORS 22 K 2W M

P C

52)

RC0204720005

RESISTORS 4.7 K 2W M

P C

53)

RC0205620005

RESISTORS 5.6 K 2W M

P C

54) RL832——12

832-1C-C-12D XPM-900

P C

55)

SR01MS3x061B

MS 3x6 BLACK

P C

56) SR01TP4x204Y

TP4x20

(1JBH6C-042021)

P C

57) SWL————1

SS004-P2430Em-PC10 XPM-900

P C

58) SWS————1

SS004-P022 BY-PF8

P C

59) TRMJE340—0

M J E 3 4 0

P C

60) TRMJE350—0

M J E 3 5 0

P C

61) TRMPSA13—0

TR MPSA13

P C

62) TRTIP122—0

T I P 1 2 2

P C

63) TRZ0103——0

TRIAC Z0103 MA1A600V RR-15

P C

64)

W20105135205

1015#14 GREEN XPM-900

P C

65)

W20105185205

1015#14 GREEN XPM-900

P C

66)

W20105235208

1015#14 GRAY XPM-900

P C

67)

W20105375202

1015#14 RED XPM-900

P C

Page 10

XPM-600E

STEREO

MOSFET POWER AMPUFIER

= = = = = = = = = = = = = = = = = =

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

= = = = = = =

= = = = = = = = = = = = = =

= = = = = = = = = = = = = = = = = =

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

= = = = = = =

= = = = = = = = = = = = = =

68)

W20105375202

1015#14 RED XPM-900

P C

69)

W2120A3000BB

1007#26 MIX XPM-900

P C

70) WS204x10x07W

SPRING

W/S.M4-L(2JS100-040050)

P C

71)

106202602001

ALUMINUM PLATE 26x20m/m t=3

P C

72)

106219207601

HEAT SINK 192x76x60 XPM-900

P C

73) PTH9M222—E2

PTH9M04BE222TS2F333 XPM-900

P C

74) PTH9M471—H1

PTH9M04BH471TS2F333 XPM-900

P C

75)

SR01MS3x061B

MS 3x6 BLACK

P C

76) SR01MS3x161W

MS 3x16 (1JBHMC-031600)

P C

77)

SR01TP3x103B

TP 3x10 BLACK

P C

78)

SR03TP4x084B

FMT+W TP 4x8 BLACK

P C

79)

TRBUZ900NDP0

BUZ900NDP MOSFET XPM-600

P C

80)

TRBUZ905DP-0

BUZ905DP MOSFET XPM-600

P C

81)

WS132x08x10W

3.2x0.8x10 (2IFA032-081000)

P C

82) WS203x08x05W

SPRING

W/S.M3-L(2JS100-030050)

P C

1 0

83) 2SA970BL—0

TR 2SA970 BL

P C

1 0

84) 2SC2240BL—0

TR 2SC2240 BL

P C

85)

6003501950

XPM-900 MAIN PC BOARD T=2oz

P C

86)

700033050001

ZENER 3.3v 500mw

P C

87)

700075050001

ZENER 7.5V 500mw

P C

88)

700120050001

ZENER 12V 500mw

P C

89)

700150050001

ZENER 15V 500mw

P C

90)

700150100001

ZENER 15V 1W

P C

91) 7001N4004051

DIODE

1N4004

P C

92) 7001N4148051

DIODE

1N4148

P C

1 3

93)

MCT0A102100J

MYLAR CAP .001u T

P C

94)

MCT0A153100J

MYLAR CAP .015u T

P C

95)

MCT0A182100J

MYLAR CAP .0018u T

P C

96)

MCT0A473100J

MYLAR CAP .047u T

P C

97)

MPMSC104100J

MSC .1u 100V 5% T

P C

1 5

98)

RC0031010005

RESISTORS 100 ohm 1/4W T

P C

99)

RC0031020005

RESISTORS 1 K 1/4W T

P C

2 1

100)

RC0031030005

RESISTORS 10 K 1/4W T

P C

1 6

Page 11

101)

RC0031040005

RESISTORS 100 K 1/4W T

P C

102)

RC0031050005

RESISTORS 1 M 1/4W T

P C

103)

RC0031520005

RESISTORS 1.5 K 1/4W T

P C

104)

RC0032020005

RESISTORS 2 K 1/4W T

P C

105)

RC0032210005

RESISTORS 220 ohm 1/4W T

P C

106)

RC0032230005

RESISTORS 22 K 1/4W T

P C

107)

RC0033030005

RESISTORS 30 K 1/4W T

P C

108)

RC0033040005

RESISTORS 300 K 1/4W T

P C

109)

RC0033320005

RESISTORS 3.3 K 1/4W T

P C

110)

RC0034700005

RESISTORS 47 ohm 1/4W T

P C

111)

RC0034730005

RESISTORS 47 K 1/4W T

P C

112)

RC0035110005

RESISTORS 510ohm 1/4W T

P C

113)

RC0036830005

RESISTORS 68 K 1/4W T

P C

114)

RC0038210005

RESISTORS 820 ohm 1/4W T

P C

115)

RC0038220005

RESISTORS 8.2 K 1/4W T

P C

116)

RC0050A10005

RESISTORS 1 ohm 1/2W T

P C

117)

RC0053030005

RESISTORS 30 K 1/2W T

P C

118)

RC0054730005

RESISTORS 47 K 1/2W T

P C

119)

RM0030K47501

RESISTORS 475 ohm 1/4W T

P C

120)

RM00310K0001

RESISTORS 10K 1% 1/4W T

P C

121) 105006400001

6.4m/m

P C

122)

6000680600

XPM-900 POWER PC BOARD T=oz

P C

123)

MPMPX473275K

MPX .047u 275VAC 10%

P C

124)

NTC0120L

NTC 20A SCK-0120 XPM-900

P C

125)

RS0500122005

1.2 K 5W SQP TYPE

P C

126)

W2010G130051

1015#14 BROWN XPM-900E

P C

127)

W2010G180056

1015#14 BLUE XPM-900E

P C

128) FAD012080001

SP802512H L=350m/m+XH

P C

129)

FH63032I

FUSE HOLD HTB-32I VDE TYPE

P C

130)

FS630ULC060F

FUSE 6x30 FAST/GLASS U/C 6A

P C

131)

FTSF-006

PLASTIC FOOT SF-006

P C

132)

IBXPM900—GI

MANUAL XPM-900 (GEMINI)

P C

133)

KB1819BL0001

KNOB 18x19 BLACK XPM-900

P C

134)

NTM8x17x080B

NUT 5/16 (0A0220-310005)

P C

135) PB420215

PLOY BAG 8.5"x16.5"X0.05

P C

136) PT130———2

TRANS. 130m/m XPM-600E 230V

P C

137) SR01MS3x042B

MST 3x4 BLACK(1JPH1C-030424)

P C

138) SR01MS3x061B

MS 3x6 BLACK(1JBHMC-030604)

P C

1 0

139)

SR01MS3x121B

MS 3x12 BLACK

P C

Page 12

140) SR01MS3x081W

MS 3x8 (1JPHMC-030800)

P C

141)

SR01MS4x061W

MS 4x6 (PLATING)

P C

142)

SR01MS4x082B

MST 4x8 BLACK (1JBH1C-040824)

P C

1 6

143)

SR01TP3x063B

TP 3x6 BLACK (1JBHCC-030625)

P C

144)

SR01TP3x103B

TP 3x10 BLACK (1JBHCC-031024)

P C

145)

SR03TP4x084B

FMT+W TP 4x8 (1JBP6C-040825)

P C

1 4

146) SR10MS8x751B

5/16x3" (1ATKMO-31C004)

P C

147) SWP————9

R22-22B-11B XPM-900

P C

148)

VR16A1031501

16K4x1 L-15 XPM-900

P C

149)

W2010G445101

1015#14 BROWN XPM-900E

P C

150)

W2010G505106

1015#14 BLUE XPM-900E

P C

151) W2010I12510A

1015#18

GR+YL

P C

152)

W20110120101

1015#14 BROWN XPM-900E

P C

153)

W5010A370032

2852#26 RED XPM-900

P C

154)

W5010A460038

2852#26 GRAY XPM-900

P C

155)

WDGEMINI

GEMINI WARRANTY CARD

P C

156)

WS407x03x09Y

EXT TOOTH W/S. 3m/m

P C

4 6 5

Page 13

1 )

1 0 2 0 5 6 5 4 3 3 0 1

SPACER XPM-900

P C

2 )

1 0 2 1 1 9 2 1 4 7 0 2

CARTON XPM-900

P C

3 )

1 0 2 2 6 0 0 1 8 0 0 2

EXT.CARTON XPM-900

P C

4 )

1 0 3 0 1 2 0 0 5 7 0 0

SPACER 1200x570m/m

P C

5 )

1 0 5 0 1 1 0 0 8 5 0 1

HOLDER XPM-900

P C

6 )

1 0 5 0 3 2 4 0 9 6 0 1

WALL XPM-900

P C

7 )

1 0 5 0 3 4 6 0 8 5 0 1

SILD PANEL XPM-900

P C

8 )

1 0 5 2 4 2 6 0 8 6 0 3

BACK BOARD XPM-900

P C

9 )

1 0 5 3 4 3 4 3 1 8 0 1

TOP COVER XPM-900

P C

1 0 )

1 0 5 4 4 3 4 3 1 7 0 1

BOTTOM CABI XPM-900

P C

1 1 )

1 0 7 0 4 2 0 0 2 5 0 1

AIRFILTER 420x25m/m XPM-900

P C

1 2 )

1 0 7 0 4 2 0 0 4 0 0 2

PVC COVER XPM-900

P C

1 3 )

1 0 7 0 A C S 0 3 5 0 1

ACS-3.5 PVC RED

P C

1 4 )

1 0 7 0 K G - 0 1 0 —

M0VEABLE BUSHING KG-010

1 5 )

1 0 7 0 S C B - 1 0 —

SPACER SUPPORTS SCB-10 XPM-900

P C

1 6 )

1 0 7 0 S S - 6 — —

SELF RETATINING SPALERS SS-6

P C

1 7 )

1 0 7 0 Y J - 9 8 — -

NYLON CLAMPER YJ-98

P C

1 2

1 8 )

A L 2 0 1 A L 5 0 1 0 1

AL201/AL501 SJT W-A 14AWG 6FT

P C

1 9 )

A O 0 1 6 D 1 3 0 — -

3P AC INLET AC-016D130 XPM-900

P C

2 0 )

2 S A 9 7 0 B L — 0

TR 2SA970 BL

P C

1 0

2 1 )

2 S C 2 2 4 0 B L — 0

TR 2SC2240 BL

P C

2 2 )

6 0 0 3 5 0 1 9 5 0 —

XPM-900 MAIN PC BOARD T=2oz

P C

2 3 )

7 0 0 0 3 3 0 5 0 0 0 1

ZENER 3.3v 500mw

P C

2 4 )

7 0 0 0 7 5 0 5 0 0 0 1

ZENER 7.5V 500mw

P C

2 5 )

7 0 0 1 2 0 0 5 0 0 0 1

ZENER 12V 500mw

P C

2 6 )

7 0 0 1 5 0 0 5 0 0 0 1

ZENER 15V 500mw

P C

2 7 )

7 0 0 1 5 0 1 0 0 0 0 1

ZENER 15V 1W

P C

2 8 )

7 0 0 1 N 4 0 0 4 0 5 1

DIODE 1N4004

P C

2 9 )

7 0 0 1 N 4 1 4 8 0 5 1

DIODE 1N4148

P C

1 3

3 0 )

M C T 0 A 1 0 2 1 0 0 J

MYLAR CAP .001u T

P C

3 1 )

M C T 0 A 1 5 3 1 0 0 J

MYLAR CAP .015u T

P C

3 2 )

M C T 0 A 1 8 2 1 0 0 J

MYLAR CAP .0018u T

P C

3 3 )

M C T 0 A 4 7 3 1 0 0 J

MYLAR CAP .047u T

P C

3 4 )

M P M S C 1 0 4 1 0 0 J

MSC .1u 100V 5% T

P C

1 5

3 5 )

R C 0 0 3 1 0 1 0 0 0 5

RESISTORS 100 ohm 1/4W T

P C

3 6 )

R C 0 0 3 1 0 2 0 0 0 5

RESISTORS 1 K 1/4W T

P C

2 1

3 7 )

R C 0 0 3 1 0 3 0 0 0 5

RESISTORS 10 K 1/4W T

P C

1 6

3 8 )

R C 0 0 3 1 0 4 0 0 0 5

RESISTORS 100 K 1/4W T

P C

3 9 )

R C 0 0 3 1 0 5 0 0 0 5

RESISTORS 1 M 1/4W T

P C

4 0 )

R C 0 0 3 1 5 2 0 0 0 5

RESISTORS 1.5 K 1/4W T

P C

XPM-900

Page 14

4 1 )

R C 0 0 3 2 0 2 0 0 0 5

RESISTORS 2 K 1/4W T

P C

4 2 )

R C 0 0 3 2 2 1 0 0 0 5

RESISTORS 220 ohm 1/4W T

P C

4 3 )

R C 0 0 3 2 2 3 0 0 0 5

RESISTORS 22 K 1/4W T

P C

4 4 )

R C 0 0 3 3 0 3 0 0 0 5

RESISTORS 30 K 1/4W T

P C

4 5 )

R C 0 0 3 3 0 4 0 0 0 5

RESISTORS 300 K 1/4W T

P C

4 6 )

R C 0 0 3 3 3 2 0 0 0 5

RESISTORS 3.3 K 1/4W T

P C

4 7 )

R C 0 0 3 4 7 0 0 0 0 5

RESISTORS 47 ohm 1/4W T

P C

4 8 )

R C 0 0 3 4 7 3 0 0 0 5

RESISTORS 47 K 1/4W T

P C

4 9 )

R C 0 0 3 5 1 1 0 0 0 5

RESISTORS 510ohm 1/4W T

P C

5 0 )

R C 0 0 3 6 8 3 0 0 0 5

RESISTORS 68 K 1/4W T

P C

5 1 )

R C 0 0 3 8 2 1 0 0 0 5

RESISTORS 820 ohm 1/4W T

P C

5 2 )

R C 0 0 3 8 2 2 0 0 0 5

RESISTORS 8.2 K 1/4W T

P C

5 3 )

R C 0 0 5 0 A 1 0 0 0 5

RESISTORS 1 ohm 1/2W T

P C

5 4 )

R C 0 0 5 3 0 3 0 0 0 5

RESISTORS 30 K 1/2W T

P C

5 5 )

R C 0 0 5 4 7 3 0 0 0 5

RESISTORS 47 K 1/2W T

P C

5 6 )

R M 0 0 3 0 K 4 7 5 0 1

RESISTORS 475 ohm 1/4W T

P C

5 7 )

R M 0 0 3 1 0 K 0 0 0 1

RESISTORS 10K 1% 1/4W T

P C

5 8 )

1 0 5 0 0 6 4 0 0 0 0 1

6.4m/m PIN

P C

5 9 )

1 0 6 2 0 1 3 0 2 0 0 1

HEAT SINK BLACK 13x20 XPM-900

P C

6 0 )

1 0 6 2 0 3 0 0 3 0 0 3

RECTIFER HEAT SINK XPB-1600

P C

6 1 )

1 0 7 0 L E D - 3 . 5 -

LED SPACER SUPPORT LED-3.5

P C

6 2 )

7 0 0 K B P 0 6 0 0 0 2

RECTIFIER KBP06 2A 600V

P C

6 3 )

7 0 0 M P 3 5 0 4 W 0 2

RECTIFIER MP3504W 35A 400V

P C

6 4 )

C C N 0 A 1 0 1 2 5 0 K

CERAMIC CAP 100P 250V

P C

6 5 )

C C N 0 A 6 8 0 5 0 0 J

CERAMIC CAP 68P 500V NPO 5%

P C

6 6 )

C O I L 1 6 1 1 5 T 6 L

COIL 1.6x10.1x11.5T-6L XPM-900

P C

6 7 )

E C L 0 6 8 0 0 1 0 0 M

ELEC CAP 6800u100v

P C

6 8 )

E C S 0 0 0 1 0 0 5 0 M

ELEC CAP 10u50v

P C

6 9 )

E C S 0 0 1 0 0 0 2 5 M

ELEC CAP 100u25v

P C

7 0 )

E C S 0 0 1 0 0 1 0 0 M

ELEC CAP 100u100v

P C

7 1 )

E C S 0 0 2 2 0 0 1 6 M

ELEC CAP 220u16v

P C

7 2 )

E C S 0 1 0 0 0 0 2 5 M

ELEC CAP 1000u25v

P C

7 3 )

E C S 0 2 2 0 0 0 2 5 M

ELEC CAP 2200u25v

P C

7 4 )

I C N J M 3 4 0 4 A D -

NJM3404AD

P C

7 5 )

I C T L 0 7 2 C P — -

TL072CP

P C

7 6 )

J S 1 0 0 1 0 2 5 0 0 3

BASE 3P 2.5m/m

P C

7 7 )

J S 1 0 0 1 0 2 5 0 1 2

BASE 12P 2.5m/m

P C

7 8 )

J S 1 0 0 1 R 2 5 0 0 2

BASE 2P JS-1001R-02

P C

7 9 )

L D G 0 5 0 2 1 0 0 3 0

LED 5m/m GREEN

P C

8 0 )

L D R 0 5 0 4 1 0 0 3 0

LDE 5m/m RED

P C

Page 15

8 1 )

L D Y 0 5 0 6 1 0 0 3 0

LDE 5m/m YELLOW

P C

8 2 )

M J 0 8 6 0 2 5 0 9 0 0

CONNOC JACK 086-25-90

P C

8 3 )

M J C P J - 0 6 5 — -

JACK CPJ-065 XPM-900

P C

8 4 )

M P M E A 1 0 4 2 5 0 K

MEA .1u 250V 10%

P C

8 5 )

M P M E F 1 0 4 2 5 0 K

MEF .1u 250V 10%

P C

8 6 )

N T M 3 x 0 7 x 0 3 0 Y

NUT 3m/m W/S (0J0010-030001)

P C

8 7 )

R C 0 2 0 0 A 4 7 0 0 5

RESISTORS 4.7 ohm 2W M

P C

8 8 )

R C 0 2 0 1 0 0 0 0 0 5

RESISTORS 10 ohm 2W M

P C

8 9 )

R C 0 2 0 2 2 3 0 0 0 5

RESISTORS 22 K 2W M

P C

9 0 )

R C 0 2 0 4 7 2 0 0 0 5

RESISTORS 4.7 K 2W M

P C

9 1 )

R C 0 2 0 5 6 2 0 0 0 5

RESISTORS 5.6 K 2W M

P C

9 2 )

RL832——12

832-1C-C-12D XPM-900

P C

9 3 )

S R 0 1 M S 3 x 0 6 1 B

MS 3x6 BLACK

P C

9 4 )

S R 0 1 T P 4 x 2 0 4 Y

TP4x20 (1JBH6C-042021)

P C

9 5 )

SWL————1

SS004-P2430Em-PC10 XPM-900

P C

9 6 )

SWS————1

SS004-P022 BY-PF8

P C

9 7 )

T R M J E 3 4 0 — 0

M J E 3 4 0

P C

9 8 )

T R M J E 3 5 0 — 0

M J E 3 5 0

P C

9 9 )

TRMPSA13—0

TR MPSA13

P C

1 0 0 )

T R T I P 1 2 2 — 0

T I P 1 2 2

P C

1 0 1 )

TRZ0103——0

TRIAC Z0103 MA1A600V

P C

1 0 2 )

W 2 0 1 0 5 1 3 5 2 0 5

1015#14 GREEN XPM-900

P C

1 0 3 )

W 2 0 1 0 5 1 8 5 2 0 5

1015#14 GREEN XPM-900

P C

1 0 4 )

W 2 0 1 0 5 2 3 5 2 0 8

1015#14 GRAY XPM-900

P C

1 0 5 )

W 2 0 1 0 5 3 7 5 2 0 2

1015#14 RED XPM-900

P C

1 0 6 )

W 2 1 2 0 A 3 0 0 0 B B

1007#26 MIX XPM-900

P C

1 0 7 )

W S 2 0 4 x 1 0 x 0 7 W

SPRING W/S.M4-L(2JS100-040050)

P C

1 0 8 )

1 0 6 2 1 9 2 0 7 6 0 1

HEAT SINK 192x76x60 XPM-900

P C

1 0 9 )

P T H 9 M 2 2 2 — E 2

PTH9M04BE222TS2F333 XPM-900

P C

1 1 0 )

PTH9M471—H1

PTH9M04BH471TS2F333 XPM-900

P C

1 1 1 )

S R 0 1 M S 3 x 0 6 1 B

MS 3x6 BLACK

P C

1 1 2 )

S R 0 1 M S 3 x 1 2 1 B

MS 3x12 BLACK

P C

1 2

1 1 3 )

S R 0 1 T P 3 x 1 0 3 B

TP 3x10 BLACK

P C

1 1 4 )

S R 0 3 T P 4 x 0 8 4 B

FMT+W TP 4x8 BLACK

P C

1 1 5 )

T R B U Z 9 0 1 P — 0

BUZ901P MOSFET XPM-900

P C

1 1 6 )

T R B U Z 9 0 6 P — 0

BUZ906P MOSFET XPM-900

P C

1 1 7 )

W S 1 3 2 x 0 8 x 1 0 W

3.2x0.8x10 (2IFA032-081000)

P C

1 2

1 1 8 )

W S 2 0 3 x 0 8 x 0 5 W

SPRING W/S.M3-L(2JS100-030050)

P C

1 6

1 1 9 )

1 0 5 0 0 6 4 0 0 0 0 1

6.4m/m PIN

P C

1 2 0 )

6 0 0 0 6 8 0 6 0 0 —

XPM-900 POWER PC BOARD T=oz

P C

Page 16

1 2 1 )

M P M P X 4 7 3 2 7 5 K

MPX .047u 275VAC 10%

P C

1 2 2 )

N T C 0 1 2 0 L

NTC 20A SCK-0120 XPM-900

P C

1 2 3 )

R S 0 5 0 0 1 2 2 0 0 5

1.2 K 5W SQP TYPE

P C

1 2 4 )

W 2 0 1 0 G 1 3 0 0 5 0

1015#14 BLACK XPM-900U

P C

1 2 5 )

W 2 0 1 0 G 1 8 0 0 5 9

1015#14 WHITE XPM-900U

P C

1 2 6 )

F A D 0 1 2 0 8 0 0 0 1

SP802512H L=350m/m+XH

P C

1 2 7 )

F H 6 3 0 2 0 7 D

FUSE HOLD CQ-207D

P C

1 2 8 )

F S 6 3 0 U L C 1 2 0 F

FUSE 6x30 FAST/GLASS U/C 12A

P C

1 2 9 )

F T S F - 0 0 6

PLASTIC FOOT SF-006

P C

1 3 0 )

I B X P M 9 0 0 — G I

MANUAL XPM-900 (GEMINI)

P C

1 3 1 )

K B 1 8 1 9 B L 0 0 0 1

KNOB 18x19 BLACK XPM-900

P C

1 3 2 )

N T M 8 x 1 7 x 0 8 0 B

NUT 5/16 (0A0220-310005)

P C

1 3 3 )

P B 4 2 0 2 1 5

PLOY BAG 8.5"x16.5"X0.05

P C

1 3 4 )

PT160———2

TRANS. 160m/m XPM-900U 120V

P C

1 3 5 )

S P K 1 0 4 7 R 2 0 0 1

WIN-1047R2 R/B XPM-900

P C

1 3 6 )

S P K 1 0 4 7 R 2 0 0 2

WTN-1047R2 B/R XPM-900

P C

1 3 7 )

SPKCOVER—1

WIN-1047R2 COVER BLACK XPM-900

P C

1 3 8 )

SPKCOVER—2

WIN-1047R2 COVER RED XPM-900

P C

1 3 9 )

S R 0 1 M S 3 x 0 4 2 B

MST 3x4 BLACK(1JPH1C-030424)

P C

1 4 0 )

S R 0 1 M S 3 x 0 6 1 B

3x6 BLACK(1JBHMC-030604)

P C

1 0

1 4 1 )

S R 0 1 M S 3 x 0 8 1 W

3x8 (1JPHMC-030800)

P C

1 4 2 )

S R 0 1 M S 4 x 0 6 1 W

MS 4x6 (PLATING)

P C

1 4 3 )

S R 0 1 M S 3 x 1 2 1 B

MS 3x12 BLACK

P C

1 4 4 )

S R 0 1 M S 4 x 0 8 2 B

MST 4x8 BLACK (1JBH1C-040824)

P C

1 6

1 4 5 )

S R 0 1 T P 3 x 0 6 3 B

3x6 BLACK (1JBHCC-030625)

P C

1 4 6 )

S R 0 1 T P 3 x 1 0 3 B

3x10 BLACK (1JBHCC-031024)

P C

1 4 7 )

S R 0 3 T P 4 x 0 8 4 B

FMT+W TP 4x8 (1JBP6C-040825)

P C

1 4

1 4 8 )

S R 1 0 M S 8 x 7 5 1 B

5/16x3" (1ATKMO-31C004)

P C

1 4 9 )

SWP————9

R22-22B-11B XPM-900

P C

1 5 0 )

V R 1 6 A 1 0 3 1 5 0 1

16K4x1 L-15 XPM-900

P C

1 5 1 )

W 2 0 1 0 G 4 4 5 1 0 0

1015#14 BLACK XPM-900U

P C

1 5 2 )

W 2 0 1 0 G 5 0 5 1 0 9

1015#14 WHITE XPM-900U

P C

1 5 3 )

W 2 0 1 0 I 1 2 5 1 0 A

1015#18 GR+YL PC1800

P C

1 5 4 )

W 2 0 1 1 0 1 2 0 1 0 0

1015#14 BLACK XPM-900U

P C

1 5 5 )

W 5 0 1 0 A 3 7 0 0 3 2

2852#26 RED XPM-900

P C

1 5 6 )

W 5 0 1 0 A 4 6 0 0 3 8

2852#26 GRAY XPM-900

P C

Page 17

1) 102056543301

SPACER XPM-900

2) 102119214703

CARTON XPM-1200

3) 102260018003

EXT.CARTON XPM-1200

4) 103012005700

SPACER 1200x570m/m

5) 105011008501

HOLDER XPM-900

6) 105032409601

WALL XPM-900

7) 105034608501

SILD PANEL XPM-900

8) 105242608605

BACK BOARD XPM-1200

9) 105343431801

TOP COVER XPM-900

10) 105443431701

BOTTOM CABI XPM-900

11) 107042002501

AIRFILTER 420x25m/m XPM-900

12) 107042004003

PVC COVER XPM-1200

13) 1070ACS03501

ACS-3.5 PVC RED

14) 1070KG-010

M0VEABLE BUSHING KG-010

15) 1070SCB-10

SPACER SUPPORTS SCB-10 XPM-900

16) 1070SS-6

SELF RETATINING SPALERS SS-6

17) 1070YJ-98

NYLON CLAMPER YJ-98

18) AL201AL50101

AL201/AL501 SJT W-A 14AWG 6FT

19) AO016D130

3P AC INLET AC-016D130 XPM-900

20) 105006400001

6.4m/m PIN

21) 106201302001

HEAT SINK BLACK 13x20 XPM-900

22) 106203003003

RECTIFER HEAT SINK XPB-1600

23) 1070LED-3.5-

LED SPACER SUPPORT LED-3.5

24) 700KBP060002

RECTIFIER KBP06 2A 600V

25) 700MP3504W02

RECTIFIER MP3504W 35A 400V

26) CCN0A101250K

CERAMIC CAP 100P 250V

27) CCN0A680500J

CERAMIC CAP 68P 500V NPO 5%

28) COIL16115T6L

COIL 1.6x10.1x11.5T-6L XPM-900

29) ECL06800100M

ELEC CAP 6800u100v

30) ECS00010050M

ELEC CAP 10u50v

31) ECS00100025M

ELEC CAP 100u25v

32) ECS00100100M

ELEC CAP 100u100v

33) ECS00220016M

ELEC CAP 220u16v

34) ECS01000025M

ELEC CAP 1000u25v

35) ECS02200025M

ELEC CAP 2200u25v

36) ICNJM3404AD-

IC NJM3404AD

37) ICTL072CP

IC TL072CP

38) JS1001025003

BASE 3P 2.5m/m

39) JS1001025012

BASE 12P 2.5m/m

40) JS1001R25002

BASE 2P JS-1001R-02

XPM-1200

Page 18

41) LDG050210030

LED 5m/m GREEN

42) LDR050410030

LDE 5m/m RED

43) LDY050610030

LDE 5m/m YELLOW

44) MJ0860250900

CONNOC JACK 086-25-90

45) MJCPJ-065—-

JACK CPJ-065 XPM-900

46) MPMEA104250K

MEA .1u 250V 10%

47) MPMEF104250K

MEF .1u 250V 10%

48) NTM3x07x030Y

NUT 3m/m W/S (0J0010-030001)

49) RC0200A47005

RESISTORS 4.7 ohm 2W M

50) RC0201000005

RESISTORS 10 ohm 2W M

51) RC0202230005

RESISTORS 22 K 2W M

52) RC0204720005

RESISTORS 4.7 K 2W M

53) RC0205620005

RESISTORS 5.6 K 2W M

54) RL832——12

832-1C-C-12D XPM-900

55) SR01MS3x061B

MS 3x6 BLACK

56) SR01TP4x204Y

TP4x20 (1JBH6C-042021)

57) SWL————1

SS004-P2430Em-PC10 XPM-900

58) SWS————1

SS004-P022 BY-PF8

59) TRMJE340—0

MJE340

60) TRMJE350—0

MJE350

61) TRMPSA13—0

TR MPSA13

62) TRTIP122—0

TIP122

63) TRZ0103——0

TRIAC Z0103 MA1A600V RR-15

64) W20105135205

1015#14 GREEN XPM-900

65) W20105185205

1015#14 GREEN XPM-900

66) W20105235208

1015#14 GRAY XPM-900

67) W20105375202

1015#14 RED XPM-900

68) W2120A3000BB

1007#26 MIX XPM-900

69) WS204x10x07W

SPRING W/S.M4-L(2JS100-040050)

70) 106219207601

HEAT SINK 192x76x60 XPM-900

71) PTH9M222—E2

PTH9M04BE222TS2F333 XPM-900

72) PTH9M471—H1

PTH9M04BH471TS2F333 XPM-900

73) SR01MS3x061B

MS 3x6 BLACK

74) SR01MS3x121B

MS 3x12 BLACK

75) SR01TP3x103B

TP 3x10 BLACK

76) SR03TP4x084B

FMT+W TP 4x8 BLACK

77) TRBUZ901NDP0

BUZ901NDP MOSFET XPM-1200

78) TRBUZ906DP-0

BUZ906DP MOSFET XPM-1200

79) WS132x08x10W

3.2x0.8x10 (2IFA032-081000)

80) WS203x08x05W

SPRING W/S.M3-L(2JS100-030050)

Page 19

81) 2SA970BL—0

TR 2SA970 BL

82) 2SC2240BL—0

TR 2SC2240 BL

83) 6003501950—

XPM-900 MAIN PC BOARD T=2oz

84) 700033050001

ZENER 3.3v 500mw

85) 700075050001

ZENER 7.5V 500mw

86) 700120050001

ZENER 12V 500mw

87) 700150050001

ZENER 15V 500mw

88) 700150100001

ZENER 15V 1W

89) 7001N4004051

DIODE 1N4004

90) 7001N4148051

DIODE 1N4148

91) MCT0A102100J

MYLAR CAP .001u T

92) MCT0A153100J

MYLAR CAP .015u T

93) MCT0A182100J

MYLAR CAP .0018u T

94) MCT0A473100J

MYLAR CAP .047u T

95) MPMSC104100J

MSC .1u 100V 5% T

96) RC0031010005

RESISTORS 100 ohm 1/4W T

97) RC0031020005

RESISTORS 1 K 1/4W T

98) RC0031030005

RESISTORS 10 K 1/4W T

99) RC0031040005

RESISTORS 100 K 1/4W T

100) RC0031050005

RESISTORS 1 M 1/4W T

101) RC0031520005

RESISTORS 1.5 K 1/4W T

102) RC0032020005

RESISTORS 2 K 1/4W T

103) RC0032210005

RESISTORS 220 ohm 1/4W T

104) RC0032230005

RESISTORS 22 K 1/4W T

105) RC0033030005

RESISTORS 30 K 1/4W T

106) RC0033040005

RESISTORS 300 K 1/4W T

107) RC0033320005

RESISTORS 3.3 K 1/4W T

108) RC0034700005

RESISTORS 47 ohm 1/4W T

109) RC0034730005

RESISTORS 47 K 1/4W T

110) RC0035110005

RESISTORS 510ohm 1/4W T

111) RC0036830005

RESISTORS 68 K 1/4W T

112) RC0038210005

RESISTORS 820 ohm 1/4W T

113) RC0038220005

RESISTORS 8.2 K 1/4W T

114) RC0050A10005

RESISTORS 1 ohm 1/2W T

115) RC0053030005

RESISTORS 30 K 1/2W T

116) RC0054730005

RESISTORS 47 K 1/2W T

117) RM0030K47501

RESISTORS 475 ohm 1/4W T

118) RM00310K0001

RESISTORS 10K 1% 1/4W T

119) 105006400001

6.4m/m PIN

120) 6000680600—

XPM-900 POWER PC BOARD T=oz

Page 20

121) MPMPX473275K

MPX .047u 275VAC 10%

122) NTC0120L——

NTC 20A SCK-0120 XPM-900

123) RS0500122005

1.2 K 5W SQP TYPE

124) W2010G130050

1015#14 BLACK XPM-900U

125) W2010G180059

1015#14 WHITE XPM-900U

126) FAD012080001

SP802512H L=350m/m+XH

127) FH630207D—-

FUSE HOLD CQ-207D

128) FS630ULC150F

FUSE 6x30 FAST/CERAMIC U/C 15A

129) FTSF-006——

PLASTIC FOOT SF-006

130) IBXPM900—GI

MANUAL XPM-900 (GEMINI)

131) KB1819BL0001

KNOB 18x19 BLACK XPM-900

132) NTM8x17x080B

NUT 5/16 (0A0220-310005)

133) PB420215——

PLOY BAG 8.5"x16.5"X0.05

134) PT160———4

TRANS. 160m/m XPM-1200U 120V

135) SPK1047R2001

WIN-1047R2 R/B XPM-900

136) SPK1047R2002

WTN-1047R2 B/R XPM-900

137) SPKCOVER—1

WIN-1047R2 COVER BLACK XPM-900

138) SPKCOVER—2

WIN-1047R2 COVER RED XPM-900

139) SR01MS3x042B

MST 3x4 BLACK(1JPH1C-030424)

140) SR01MS3x061B

MS 3x6 BLACK(1JBHMC-030604)

141) SR01MS3x081W

MS 3x8 (1JPHMC-030800)

142) SR01MS3x121B

MS 3x12 BLACK

143) SR01MS4x061W

MS 4x6 (PLATING)

144) SR01MS4x082B

MST 4x8 BLACK (1JBH1C-040824)

145) SR01TP3x063B

TP 3x6 BLACK (1JBHCC-030625)

146) SR01TP3x103B

TP 3x10 BLACK (1JBHCC-031024)

147) SR03TP4x084B

FMT+W TP 4x8 (1JBP6C-040825)

148) SR10MS8x751B

5/16x3" (1ATKMO-31C004)V3000

149) SWP————9

R22-22B-11B XPM-900

150) VR16A1031501

16K4x1 L-15 XPM-900

151) W2010G445100

1015#14 BLACK XPM-900U

152) W2010G505109

1015#14 WHITE XPM-900U

153) W2010I12510A

1015#18 GR+YL

154) W20110120100

1015#14 BLACK XPM-900U

155) W5010A370032

2852#26 RED XPM-900

156) W5010A460038

2852#26 GRAY XPM-900

157) WDGEMINI——

GEMINI WARRANTY CARD

158) WS407x03x09Y

EXT TOOTH W/S. 3m/m

X8.1

X19.1

X1.1

X29.1

X30.1

FAN1
12V 0.2A

FAN2
12V 0.2A

SW3

X4.1

X29.1

X15.1

X14.1

X19.1

X16.1

X20.1

X28.1

X27.1

120V OPTION

TO X15

TO X4

TO X29

MAIN PCB

X1.1

X2.1

X3.1

X4.1

C33
100

R57
10K 1%

R59
10K 1%

R54
10K 1%

IC2B

TL072CP

R53
10K 1%

C31
100

SW2C

C22

10/50V

R44

R45
47K

C17

1000

Q12

2SA970

Q10

2SA970

R39
47K

C18

100/25V

R38

R34

47K 1/2W

R32

22K 2W

C14
0.1

1N4148

R25
100

MJE350

R26
100

2SC2240

MJE340

R40
3K3

R41
3K3

R35
220

C25

100/100V

C23

100/100V

C20

0.1

C19
0.1

1N4148

R12

C13
0.1

C10

0.1

R18
10K

R19
10K

2SA970

2SC2240

R16
68K

R10

68K

R46

R47
47

ZD2

1N5226B

ZD6

1N5226B

1N4148

R3
1K

R4
1K

FET1

FET2

FET3

FET4

FET5

FET6

+ VCC

- VCC

SW2A

SS004-P243O-PC10

SW2B

CH B

SW2 - STEREO

C15
100

C29

100/25V

ZD10

1N5245B

C30

0.1

ZD5

1N5242B

ZD3

1N5242B

C38

10/50V

SW2D

R11

10 2W

T
R
S

X23

TRS 1/4" BAL

XLR1
XLF-3PH

R63

R64
47K

C45

1000

Q13

2SA970

Q14

2SA970

R67
47K

C41

100/25V

R68
1K

R74

47K 1/2W

R75

22K 2W

C48

0.1

D10

1N4148

R77
100

Q18

MJE350

R78
100

Q15

2SC2240

Q17

MJE340

R65
3K3

R66
3K3

R69
220

C37

100/100V

C39

100/100V

C43

0.1

C42
0.1

C56

D12

1N4148

D11

1N4148

R94

C47
0.1

C53

0.1

R88
10K

R89
10K

Q19

2SA970

Q20

2SC2240

R92
68K

R98
68K

R55

R62
47

ZD16

1N5226B

ZD13

1N5226B

D14

1N4148

D13

1N4148

R100

R101

R102

R106

R103

R104

FET7

FET8

FET9

FET10

FET11

FET12

+ VCC

- VCC

C49
100

ZD12

1N5242B

ZD15

1N5242B

R96

10 2W

C50

0.1

1.2 uH

R29
1K

ZD4

1N5236B

ZD7

1N5245B

Q11

TIP122

1000/25V

C24

10/50V

C40

10/50V

1N4004

D17

1N4004

D18

1N4004

R95

4,7 2W

C61

220/10V

C62

220/10V

R107
30K 1/2W

Q23

L201E3

R99
100K

Q21

MPSW45A

C58

220/10V

R97
22K

R87
1K5

D16

1N4004

R81
10K

OUTPUT CH B

RLY2

T90S5D12-12

C9
0.1

R13

4,7 2W

220/10V

R1
30K 1/2W

L201E3

R9
100K

MPSW45A

220/10V

R14
22K

R17
1K5

1N4004

R42
10K

1.2 uH

OUTPUT CH A

RLY1

T90S5D12-12

C28

100/25V

ZD9

1N5245B

C35
100

R56
10K 1%

R61
10K 1%

R60
10K 1%

IC2A

TL072CP

R58
10K 1%

C34
100

C32

0.1

T
R
S

X26

TRS 1/4" BAL

XLR2
XLF-3PH

OUTPUT
BRIDGE

REC1

MP3504W

REC2 BR805D

R79

1 1/2W

C21

C26

C44

C36

C57

2200/25V

C55
0.1

+ VCC

- VCC

R49
NU

R51
NU

0.1

R20

5K6 2W

R90

5K6 2W

C54 1 /160V

R22

R28
510

R21
300K

R33

30K

R23
10K

R36
10K

R37
10K

R43
30K

R31
510

R73
10K

R76
30K

R71
300K

R72

R70
510

R86
10K

R85
10K

R93
30K

R84
510

RT2

PTC 50C

RT4

PTC 50C

RT1

PTC 90C

RT3

PTC 90C

NL4MD-H
(230V ONLY)

X10

NL4MD-H
(230V ONLY)

C11 1 /160V

IC1A

NJM3404AD

IC1B

NJM3404AD

IC3A

NJM3404AD

IC3B

NJM3404AD

MAIN PCB

X25

C59

0.1

C60

0.1

SW1 - GROUND LIFT

SS004-P022BY-PF8

R52

1 M

C27

0.047

X14
BLU

X19
RED

X16
GRY

X20
YEL

X28
GRN

X27
VLT

X4
NU

X5
NU

X11
NU

X15
NU

X29
NU

X7
NU

Q22
2SA970

R91
820

R105
475 1%

ZD14

1N5226B

Q2
2SA970

R15
820

R2
475 1%

ZD1

1N5226B

C52
0.015

7.5V

15V

+15V

-15V

3.3V

12V

X3
NU

X9
NU

STEREO

MONO

BRIDGE

D4
1N4148

D15
1N4148

C5
0.015

2SA970

R24

8K2

R27
10K

C12
1800

R30
10K

C16 1 /160V

ZD8

1N5242B

Q16

2SA970

R80

8K2

R82

10K

R83

10K

C51
1800

C46 1 /160V

ZD11

1N5242B

12V

100 @ 25C

330 @ 25C

X12
NU

+ 15V

- 15V

+ 15V

X13
R/W

X18
R/W

X22
WHT

X24
WHT

X17
B/W

X21
B/W

+ VCC

- VCC

R50
4K7 2W

R48
4K7 2W

GRD

CH A

ORN 120V

BRN

POWER PCB

RT2

N20SP0R7-Q 12A
RT1

N20SP0R7-Q 12A

X3 BLK

WHT

0.047/400V

R1
1.2K 5W

BLU 230V

R1
2K

LD2
GRN

LD1
GRN

RV1
10K

RV2
10K

MONO

BRIDGE

LD5
YEL

LD8
YEL

PROTECT CH A

GAIN CH B

GAIN CH A

LD9
GRN

R3
2K

POWER

LD4
RED

LD3
GRN

LD7
RED

LD6
GRN

CLIP CH A

SIG CH A

PROTECT CH B

SIG CH B

CLIP CH B

DISPLAY PCB

1N4148

BLK

RED

BLK

BP SPK2

OUT CH A

OUT CH B

BLK

WHT

GRN

ground lift

XPM-600

XPM-900

XPM-1200

FET1, FET7

BUZ900NDP

BUZ901P

BUZ901NDP

FET2, FET8

not used

BUZ901P

not used

FET3, FET9

not used

BUZ901P

BUZ901NDP

FET4, FET10

not used

BUZ906P

not used

FET5, FET11

not used

BUZ906P

BUZ906DP

FET6, FET12

BUZ905DP

BUZ906P

BUZ906DP

C21, C26, C36, C44

4,700

µ 100V

6,800

µ 100V

6,800

µ 100V

F1 / 120Vac

10A

12A

15A

F1 / 230Vac

6.3A

10A

T1 / 120Vac

XPM-600U

XPM-900U

XPM-1200U

T1 / 230Vac

XPM-600E

XPM-900E

XPM-1200E

OUTPUT CONNECTORS

Schematic

Page 21

Worldwide Headquarters • 120 Clover Place, Edison, NJ 08837 • USA

Tel: (732) 738-9003 • Fax: (732) 738-9006

France • G.S.L. France • 11, Avenue Leon Harmel, Z.I. Antony, 92160 Antony, France

Tel: + 33 (0) 1 55 59 04 70 • Fax: + 33 (0) 1 55 59 04 80

Germany • Gemini Sound Products GmbH • Ottostrasse 6, 85757 Karlsfeld, Germany

Tel: 08131 - 39171-0 • Fax: 08131 - 39171-9

UK • Gemini Sound Products • Unit C4 Hazleton Industrial Estate, Waterlooville, UK P08 9JU

Tel: 087 087 00880 • Fax: 087 087 00990

Spain • Gemini Sound Products S.A. • Rosello, 516, Barcelona, Spain, 08026

Tel: 349-3435-0814 • Fax: 3493-347-6961

Parts of the design of this product may be protected by worldwide
patents.

Information in this manual is subject to change without notice and does
not represent a commitment on the part of the vendor. Gemini Sound
Products Corp. shall not be liable for any loss or damage whatsoever
arising from the use of information or any error contained in this
manual.

No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, electrical,
mechanical, optical, chemical, including photocopying and recording, for
any purpose without the express written permission of Gemini Sound
Products Corp.

It is recommended that all maintenance and service on this product is
performed by Gemini Sound Products Corp. or its authorized agents.

Gemini Sound Products Corp. will not accept liability for loss or damage
caused by maintenance or repair performed by unauthorized personnel.

In the USA: If you experience problems with this unit,

call 1-732-738-9003 for Gemini Customer Service.

Do not attempt to return this equipment to your dealer.

Wyszukiwarka

Podobne podstrony:
Inter MR 150 300 500 pwr Service Manual
Copland CTA 505 pwr Service Manual
Copland CTA 505 pwr Service Manual
Hafler DH500 pwr Service Manual
Macro Tech 1200 Service Manual ma1200sm original
hplj 5p 6p service manual vhnlwmi5rxab6ao6bivsrdhllvztpnnomgxi2ma vhnlwmi5rxab6ao6bivsrdhllvztpnnomg
Oberheim Prommer Service Manual
Korg SQ 10 Service Manual
MAC1500 service manual
Kyocera Universal Feeder UF 1 Service Manual
Proview RA783 LCD Service Manual
indesit witp82euy Service Manual
Glow Worm installation and service manual Hideaway 70CF UIS
Proview PZ456 LCD Service Manual
Glow Worm installation and service manual Ultimate 50CF UIS
ewm2000 service manual

więcej podobnych podstron