NOTE: REQUIRED TRANSMISSION
TUNNEL AND REINFORCING
DIAGONALS NOT SHOWN IN DRAWINGS
CHASSIS
COLLINS 7+341
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 3
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
21
14
126.9
36
30
21
46
18
11.5
8.5
14.5
11.75
COLLINS 7+241
SCALE:1:16
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 2 OF 3
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
CHASSIS PLAN
14
46
16
100°
24.30
10.5
22.25
3
8.75
COLLINS 7+341
SCALE:1:8
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 3 OF 3
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
CHASSIS
FRONT DETAIL
18.0
46.0
32.0
22.4
38.3
44.0
35.9
16.5
21.0
36.0
30.0
9.75
10.75
79°
75°
COLLINS 7+241
SCALE:1:12
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
BOTTOM RAIL
LAYOUT
25
1"
25
1"
813
32.0
COCKPIT BOTTOM
SIDE RAIL
(A1 & A2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
A
44
1"
1"
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
B1
COCKPIT BOTTOM
CROSS RAIL
(B1&B2)
25
1"
25
1"
79°
79°
911
35.9
FRONT BULKHEAD
BOTTOM CROSS
RAIL (C)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
C
25
1"
25
1"
22.6
101°
79°
22.4
COCKPIT BOTTOM
FRONT SIDE RAIL
(D1 & D2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
D
25
1"
25
1"
105°
105°
16.2
16.5
FRONT ENGINE BAY
BOTTOM CROSS RAIL
(E)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
E
25
1"
25
1"
38.5
75°
38.3
105°
ENGINE BAY
BOTTOM SIDE RAIL
(F1 & F2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
F
1"
1"
10 3/4"
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
FX
FRONT END
BOTTOM SIDE RAILS
(FX1 & FX2)
STEEL - RHS
1"x1", 16swg
16"
1"
1"
FRONT END
BOTTOM CROSS RAIL
(LD)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LD
39 1/2"
67"
22 1/4"
55 1/4"
45 3/4"
9 3/16"
35.9
66 3/4"
46
1 13/16"
J1
J2
Q
P
T
S
LC
TOP RAIL LAYOUT
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:12
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
22 1/4"
1"
1"
FRONT END
TOP CROSS RAIL
(LC)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
LC
25
1"
25
1"
1706
67.2
79°
101°
1701
67.0
TOP FRONT
SIDE RAIL
(J1 & J2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
J
25
1"
25
1"
39.5
79°
79°
39.1
SCUTTLE SUPPORT
CROSS RAIL
(P)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
P
25
1"
25
1"
101°
101°
911
35.9
901
35.5
FRONT BULKHEAD
TOP CROSS RAIL
(Q)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Q
25
1"
25
1"
13.6
11.2
53°
48°
FRONT DIAGONAL
STRENGTH MEMBER
(S & T)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
S_T
14
18
22 1/4"
3
6 3/4"
13
12
12
B
A
NOTE: D2 HIDDEN
FOR CLARITY
IN BOTTOM VIEW
H_REAR
2X
H
4X
FEU
4X
DETAIL B
SCALE 1 : 8
DETAIL A
SCALE 1 : 8
COLLINS 7+241
SCALE:1:18
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
FRONT UPRIGHT
LAYOUT
STEEL - RHS
1"x1", 16swg
1"
1"
13.0
REAR CENTER
UPRIGHT
(H_REAR)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
H_rear
1"
1"
12.0
FRONT CENTER
UPRIGHT
(H)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
H_front
1"
1"
12.4
12.2
80°
100°
FRONT END
UPRIGHTS
(FEU)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
FEU
A
O
B1
B2
A2
A1
K2
K4
M2
485
19.1
21
345
13.6
A2
K2
M2
K4
O
40
46
K4
K2
K1
K3
DETAIL A
SCALE 1 : 8
A1
K3
M1
REAR BULKHEAD
SIDE RAIL LAYOUT
COLLINS 7+241
SCALE:1:12
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
1"
1"
50°
40°
790
31.1
REAR BULKHEAD
SIDE MEMBER
(K1 & K2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
K1_2
1"
1"
10.1
130°
REAR BULKHEAD
UPRIGHT SUPPORT
(M1 & M2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
M
3"
1"
46.0
REAR BULKHEAD
TOP CROSS RAIL
(O)
STEEL - RHS
1"x3", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
O
1"
1"
73°
107°
19 13/16"
20.1
REAR BULKHEAD TOP
CROSS RAIL SUPPORT
(K3 & K4)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
K3_4
1"
24.1
47.0°
7.0°
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
N
COCKPIT TOP
SIDE RAIL
(N1/2)
1" OD x .065"
STEEL DOM
46"
4 1/2"
4 1/2"
Y
REAR BOTTOM TUBE
RU2
RU1
12"
REAR END
BOTTOM
ASSEMBLY
STEEL - RHS
1"x1" - 16swg,
3/4" TUBE
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
25
1"
25
1"
1168
46.0
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Y
REAREND BOTTOM
INNER CROSS RAIL
(Y)
STEEL - RHS
1"x1", 16swg
25
1"
25
1"
10.5
11.0
REAR END BOTTOM
SIDE RAIL
(RU1 & RU2)
STEEL - RHS
1"x1", 16swg
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
RU
46.0
R3.0
11.0
1"
REAR END
BOTTOM TUBE
STEEL - TUBE
1"
COLLINS 7+241
SCALE:1:8
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearBottomTube
4.0
4.0
R3.0
1.0
1.0
1/8"
REAR BOTTOM
PLATE
STEEL - PLATE
1/8" THICK
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearCornerPlate
O
Y
X2
NOTE: ALL ASSEMBLED PARTS FORWARD
OF "B1" AND "O" HIDDEN FOR CLARITY.
RU_FRONT
2X
B1
21"
X4
X1
X2
X3
B1
O
7.5
8°
20°
4
RU_FRONT
TOP TUBE
W1
X3
BOTTOM TUBE
X1
O
COLLINS 7+241
SCALE:1:12
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
Chassis
REAREND
LAYOUT
1"
1"
20°
14.0
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
RU_front
REAREND
BOTTOM RAIL
(RU_front)
STEEL - RHS
1"x1", 16swg
1"
1"
20.3
19.9
20°
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
X1_2
REAREND DIAGONAL
SUPPORT RAIL
(X1&X2)
STEEL - RHS
1"x1", 16swg
1"
1"
15 1/2"
14 1/2"
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
X3_4
STEEL - RHS
1"x1", 16swg
REAR END UPRIGHT
SUPPORT TUBE
(X3 & X4)
R3"
46"
NOTE: TAKE-UP FOR A 3"
RADIUS-90 DEGREE BEND IS 2 3/8"
1"
47°
14.5
REAR END
TOP TUBE
STEEL - TUBE
1"
COLLINS 7+241
SCALE:1:8
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
rearTopTube
19
3/4"
19
3/4"
51°
19°
21.9
STEEL - RHS
3/4" X 3/4", 16swg
REAR END
DIAGONAL
MEMBER (W1)
COLLINS 7+241
SCALE:1:1
SIZE DWG. NO.
A
REV.
MATERIAL
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32
ANGULAR 1
TWO PLACE DECIMAL .03
THREE PLACE DECIMAL .010
SHEET 1 OF 1
WEIGHT:
THE INFORMATION CONTAINED IN THIS
DRAWING IS NOT INTENDED FOR USE IN
THE CONSTRUCTION OR MANUFACTURE
OF PARTS. THE INFORMATION IS PROVIDED
WITHOUT WARRANY FOR EDUCATIONAL
REFERENCE ONLY.
FOR EDUCATIONAL USE ONLY
W1